Tampilkan postingan dengan label codes. Tampilkan semua postingan
Tampilkan postingan dengan label codes. Tampilkan semua postingan

Minggu, 16 Februari 2014

Canon MP287 Error Codes

0


Cara Memperbaiki Masalah Printer Canon MP 287 dan Kode Error Printer Canon MP 287

Cara Memperbaiki dan Mengatasi masalah Printer Canon MP 287 & Kode Error Printer Canon MP 287 ;
E02 : Printer Kehabisan kertas (Printer is Out of Paper ) atau kertas tidak masuk dengan baik. Masukkan kertas dengan benar.

E03 : Kertas Macet (Paper Jammed) atau Output Kertas Tertutup. Membuka Output Kertas, Reload Kertas dengan benar.

E04 atau E05 : Cartridge anda tidak terdeteksi / tidak terkenali oleh printer (The FINE Cartridge cannot be recognized). Cartridge harus terpasang dengan baik atau bukan Compatible. Cobalah Lepaskan Cartridge dulu, Kemudian pasang kembali dengan mendorong lalu Kunci cartridge sampai mengklik ke tempatnya.

E07 : Cartridge tidak dipasang dalam posisi yang benar (The FINE Cartridge is not installed in the correct position). Periksa apakah Cartridge Hitam / Warna sudah dalam posisi yang benar.

E08 : Ink Absorber hamper penuh (Ink absorber is almost full). Tekan Tombol Hitam atau Warna pada Printer anda untuk Melanjutkan Pencetakan ( Continue Printing )

E13 : Sisa Tinta tidak bisa terdeteksi ( The Remaining ink level cannot be detected ). Ganti Tinta dengan Cartridge baru dan asli. Jika anda ingin melanjutkan tanpa mengganti Cartridge baru, Tekan Tombol STOP/RESET pada Printer anda Selama 5 detik.

E14 : Cartridge tidak dikenali (The FINE Cartridge cannot be recognized). Ganti Cartridge lama dengan Cartridge baru.

E15 : Cartridge tidak dikenali (The FINE Cartridge cannot be recognized). Cartridge tidak terpasang dengan benar. Coba Lepaskan cartridge Kemudian pasang kembali ketempatnya hingga anda mengklik pengunci Cartridge tersebut.

E16 : The ink has Run Out. Jika Printer sedang mencetak data, tekan tombol STOP/RESET selama 5 detik kemudian lanjutkan Pencetakan anda. Ganti Cartridge Tinta kosong.

E30 : Dokumen terlalu kecil ketika memilih “Fit Copying is Selected”, periksa posisi dokumen pada kaca Scanner.

E31 : Printer tidak tersambung dengan Komputer (The printer is not connected with the computer). Sambungkan kabel USB dari Printer ke Port USB di Komputer

E50 : Scanning the Print Head alignment sheet has failed, Tekan tombol STOP/RESET. Pastikan kertas yang dimuat (A4 atau ukuran lainnya) sesuai dengan Print head alignment, dan juga kertas dalam posisi yang benar dan kaca plat tidak kotor. Pastikan juga Print Head Nozzles tidak tersumbat

Ketika Lampu Printer anda blinking berwarna Hijau dan lampu alarm blinking berwarna oranye bergantian,
P02 : Batalkan pencetakan dan matikan printer anda. Bersihkan / tarik kertas yang menyangkut pada printer anda. Mungkin Cartridge anda Rusak / Patah. Hidupkan Printer anda kembali.
P10 : Matikan Printer anda kemudian hidupkan kembali.
Kasus Kesalahan lainnya : matikan printer anda dan cabut kabel power listrik kemudian pasang kembali ke printer anda.

Read more

Kamis, 13 Februari 2014

E061 E100 Error Codes iR6570 Series iR5075 Series

0

Symptom

* E061-0001 (Potential ON)
* E061-0002 (Potential OFF)
* E100-0001
* E227-0004
Cause
* The pin is broken on the Primary Fan 2 Duct. The Laser Shutter is activated by the pin on the Primary Fan Duct Assembly. The linkage is pinched not allowing the laser shutter to be fully actuated (may also indicate E227-0004). Faulty Laser Scanner Assembly.
* Defective DC Controller PCB Assembly.

Action

1. Check the shutter operation and the pin on the Primary Fan Duct Assembly. If the
pin is broken replace the Primary Fan 2 Duct (iR6570 : FC6-3540-000 / iR5075
FL2-5834-000) or the Primary Fan Duct Assembly (iR6570 : FM2-3074-000 / iR5075
FM2-9694-000). If the Laser Scanner Assembly (iR6570 : FM2-3670-000 / iR5075
FM2-9832-000) has been replaced and error codes E100-0001/ E227-0004 are
intermittently indicated, proceed to the next step.
2. Remove the Primary Fan Duct Assembly (this assembly has a pin on it
that activates the laser shutter).
3. Remove and reinstall the Laser Scanner Assembly.
4. Install the Primary Fan Duct Assembly. This should free the linkage
allowing the laser shutter to be fully actuated.
5. Finally a DC Con clear resolved both of the intermittent issues (E100-0001/
E227-0004)

Blank Image or Dark Fogging Image (Including Blank Areas) and E061-0001 / E061-0002 Errors Occur : iR6570 Series
Approved


Symptom

* Blank copies,Dark fogging
* E061-0001 and E061-0002

Action

When the above error code/image problems are experienced, perform the following:

1. Check the potential sensor wiring harness for any damage. This is caused by the harness being trapped between the hopper assembly and the cable tie head.
2. If the cable is damaged repair or replace as necessary.
3. Reposition the head of the cable ties on the cable guide in a downward position.
4. Input "1" under Service Mode > COPIER > FUNCTION > DPC > DPC, press the OK key and switch the Main power off and on so as to forcibly execute the Potential Control.

Read more

 
Powered by Blogger