Removal and replacement Main gear assembly tray 2 pickup solenoid hp laserjet p 2015

17.00 in 2, 2015, and, assembly, gear, hp, laserjet, main, p, pickup, removal, replacement, solenoid, tray

1. Remove all covers.
2. Remove the fan from the printer chassis.
3. Disconnect one cable (1) at the ECU

Figure  Removing the main gear assembly

4. Release the tab on the gear (1) and slide the gear off the shaft.
5. Remove the cables from the cable guide (2).
6. Remove four screws (3).

Figure Removing the main gear assembly

Pull the main gear assembly straight away from the printer

8. To remove the tray 2 pickup solenoid, disconnect one cable (1).

FigureRemoving the tray 2 pickup solenoid

9. Remove one screw (1), and then lift the solenoid off the printer.

Figure  Removing the tray 2 pickup solenoid