RESETTER CANON MP245

09.45 in canon, manual, mp145, mp245, printer, reset, resetter

CARA MERESET CANON MP245



Untuk REset Manualnya ikuti langkah ini bos:
Ni cara manualnya,
* pwr conect-press Stop/Reset (jangan dilepas)
* press Power (jangan dilepas)-press 2 X Stop/Reset-lepaskan kedua tombol
(di lcd tampak "0")-turn off printer (wait 4 few minutes)
* turn on printer tunggu sampai lcd ada angka "1"

Rangga : bos pnya reseter bwat canon mp 245 g?

saya : masih browsing bos
drivernya udah nemu pa belum
aku barusan buka treknisi printer
langsung brosing
sapa tahu nemu :D:D


Rangga : udh...


saya : aku minta link drivernya bos
ni aku juga lagi browsing ga nemu nemu

Rangga : cari aja di www.canon.com
search ja driver nya ngambil nya yg asia
udah kelar bos pake reseter mp 198 jga bisa

saya : siiippp
bisa diupload ke teknisi printer bos
oh ya cara caranya gimana bos
ntar biar tak masukin di teknisi printer

Rangga : cara nya biasa riset manual biasa spaya dia safe mode dulu.
udh nasuk safe mode panggil reseter mp 198 nya set usb nya trus main trus platen udh gtu ja..

saya : oh ya cara masuk save mode gimana bos

Rangga : d reset manual ja..

cara reset manual

Canon MP
dengan printer powered off tetapi terhubung ke sumber listrik, Anda harus:
A) Tekan stop / tombol reset, kemudian tekan tombol [ON / OFF tombol] untuk me-restart
B) Press [ON / OFF] lagi dan kemudian tekan dua kali menghentikan / tombol reset.
C) Press [ON / OFF] & Stop / tombol reset bersama-sama, ini saatnya untuk memasuki
status perbaikan dan daya lampu akan hijau,
D) Tekan stop / reset 4x tombol dan lampu peringatan akan keluar
di [ON / OFF] tombol.
E) Matikan printer. (Harus mematikan) dan kemudian hidupkan lagi.
Gunakan dengan resiko sendiri, aku akan mencoba cara ini dan saya Pixma MP145 tidak
berkedip lagi.

Jumlah Reset
menekan tombol
LED Fungsi Keterangan
0 time Green Power off

1 kali Orange Service pola cetak
2 kali Green EEPROM print
3 kali Orange EEPROM reset
4 kali Green Limbah ulang tinta counter

5) Cabut kabel power. (Untuk MP145 / MP150)
6) Turn Off Power. (Untuk MP160)

RESETTER MP198
klik disini untuk download resetternya

Read more

RESET MANUAL CANON MP145

22.31 in 308, canon, manual, mp145, mx, printer, reset

Canon MP145 waste ink counter
The method used to is by reset the printer

Error ink cartridges are not installed properly (error E5) :
Step 1 : Push Power switch by continue (Push Power On/Off)
Step 2 : inserrt plug(Hold and Press Power)
step 3 : Push Reset button 1x, Let Power button, Push Reset twice till 0
Step 4 : Push + display change from 0 to 1 (push button + to change 0 to 1)
Step 5 : Push Power switch again , Printer will be print 1 page
(push power button–>start button till 1 page.)
step 6 : Open cover
Step 7 : Unplug power cable
Step 8 : Take out ink PG 40 and PG 41
Step 9 : Insert plug again
Step 10 : Push power switch
Step 11 : Open cover (scan cover)
Step 12 : Inksert ink PG 40 , PG 41 again

These are the step How to Reset waste ink counter (error E16) :
1. Turn off power button (power button is in ),
Press and Hold STOP/RESET then Push ON/OFF button
2. Hold ON/OFF button, press STOP/RESET button 2x
3. Let both of button and printer in to SERVICE MODE
4. Printer will be charging
5. After printer finish charging, ush STOP/RESET button 4x. (Waste ink counter reset)
6. Every time you push STOP/RESET button ,
ON/OFF lamp will change green and oranye.
7. Turn off printer dan and take out POWER button
8. Turn on printer again.

The number of the Reset :
button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)

Error Code/Kode Error :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 – Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error – USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

Read more

Canon PIXMA MP145

19.15 in canon, mp145, pixma

Reset manual "Ink Absorber Full" for pixma MP145 ( error message E27) actually , its work as same as Canon MP 150 or MP 160, This is the step :

Canon MP145
with the printer powered off but connected to a power source , you must:
A) Press stop/reset button, and then press [ON/OFF] button to restart
B) Press [ON/OFF] again and then press twice the stop/reset button.
C) Press [ON/OFF] & Stop/reset button together, this time to enter
the repair status and power lights will be green,
D) Press stop/reset button 4x and warning lights will be go out
in [ON/OFF]button.
E) Turn off the printer.( it must be turn off) and then turn it on again.
Use with your own risk , ill try this way and my Pixma MP145 not
blink again.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off

1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)

Read more