Cara Menentukan Data Kaki Flyback

03.12 in canon, cara, counter, data, flyback, ink, ip1000, kaki, menentukan, pixma, printer, reset, resett, waste

Berikut ini, kang EKo akan membahas tentang Cara Menentukan Data Kaki Flyback. Karena langkah ini sangat penting jika kita akan mengganti flyback monitor . OK mari kita belajar bersama......

Flyback adalah komponen monitor yg berfungsi untuk menghasilkan tegangan tinggi dan tegangan lainnya yg dibutuhkan monitor. Flyback sebenarnya adalah trafo tapi trafo untuk tegangan tinggi agar tabung bekerja mengeluarkan gambar.

Bagian-bagian flyback adalah sbb:
A. Bagian primer
B. Bagian sekunder
C. Bagian yg terpisah antara primer dan sekunder yaitu : ABL, Screen dan Fokus dan KOP flyback.



Bagian primer flyback antara lain:

1. colector : terhubung dg colector transistor horisontal. jika flyback kerja maka pin ini akan menghasilkan tegangan tinggi. Jangan di ukur dg multitester.

2. dioda dumper : terhubung dg dioda dumper. Tidak semua flyback memiliki kaki ini.

3. B+ : terhubung dg tegangan B+ 55v dan FET IRF630. Ini adalah kaki untuk tegangan kerja flyback. Jika teg B+ tdk masuk maka flyback tidak kerja dan monitor tidak nyala.

Jadi ketiga kaki ini jika diukur dengan ohm meter x1 terhubung.

Bagian sekunder flyback antara lain :

1. Gruond : terhubung dg ground monitor.

2. AFC : Automatic Frequency Control. tegangan 30-40 dcv Fungsinya untuk mengatur kerja IRF630, kalau tegangan terlalu tinggi, misal butuhnya 30 vdc dikasih 40 vdc maka IRF tidak bekerja, akibatnya tegangan B+ akan tetap 55v dan gambar monitor akan sempit kanan kirinya. Kalau IRF kerja, maka tegangan 55v akan menjadi tegangan 90-125v tergantung resolusi monitornya.

3. G1 : terhubung dg dioda dg posisi terbalik sehingga keluarannya adalah tegangan minus antara - 100-175 dcv. Dan setelah dioda akan ada elco regulator yg juga terbalik, jadi kaki positif dapat ground monitor dan kaki negatif dapat katoda dioda terbalik itu.

Bagian ABL

ABL : Automatic Brightness Limiter. tegangan tak terukur. Pin ini harus terhubung ke jalurnya jika tidak maka akan keluar percikan/ loncatan api listrik. Fungsinya untuk membatasi brightness yg menuju ke blok RGB secara otomatis.

Bagian Screen (G2):
Adalah bagian yg berfungsi untuk mengatur terang gelap gambar.

Bagian Fokus (G3/G4):
Adalah bagian yg berfungsi untuk mengatur fokus gambar (kabur tidaknya gambar)

Bagian KOP FLyback :
Adalah bagian yg menghasilkan tegangan tinggi 26kV yang menuju atas tabung.

OK, demikian penjelasan singkat tentang flyback.....

Oya ... tidak semua kaki flyback dipakai. Yang harus terpasang dan wajib dipasang adalah kaki :
Colector, B+, G1, Ground, AFC, ABL dan Ground kaki di samping flyback.

Dan urutan kaki flyback tiap type pasti berbeda jadi kalau mengganti flyback tidak asal langsung pasang kecuali typenya sama persis....

InsyaAllah bahasan mendatang adalah tentang Cara Mengganti / Membandrek Flyback dengan flyback lain type....

Selamat Belajar ....

Read more

Cara Reset Canon Pixma iP1000

00.32 in canon, cara, counter, ink, ip1000, pixma, printer, reset, resett, waste

Mungkin resetter pixma iP1000 ini sudah kadaluwarso, tapi barangkali ada yang masih membutuhkan. Jadi saya tetep coba untuk posting artikel reset canon iP1000 ini. OK Lanjuut....

Printer canon iP1000 perlu direset bila terjadi :
Green orange berkedip bergantian

Berikut langkah-langkah Reset iP1000 :

1. Driver harus sudah di install. Jika belum punya drivernya klik disini.
2. Printer harus dalam keadaan service mode (temporary reset) .

Untuk mengaktifkan service mode:

* Cabut kabel power listrik
* Tekan power (di printer)
* Colokan power listrik (lampu akan berwarna hijau)
* Sambil menekan power tekan tombol resume (lampu berubah orange)
* Lepas keduanya (printer akan mati)
* Tekan tombol power lagi dan langsung lepaskan.(lampu akan berwarna hijau) (jangan mencabut power listrik)

3. Jalankan Resetter iP1000 dengan dobel klik screen.exe Jika belum punya, download di sini.
4. Ikuti gambar berikut ini .....


5. Cabut power listrik, colokan kembali dan nyalakan (printer initial/tunggu sampai lampu tdk berkedip. Selesai. Mudah khan...................

Read more

Canon PIXMA MG8140 Drivers Download

21.15 in canon, download, drivers, mg8140, pixma

Download Driver Printer Canon PIXMA MG8140
Compatibility and system requirements :

Windows 8
Windows 7
WIndows Vista
Windows XP
all drivers Support 32bit and 64bit

Link Download Driver Printer Canon PIXMA MG8140

How to install the drivers Canon PIXMA MG8140 Printer for Windows :
1. Download the driver Canon PIXMA MG8140  Printer, for link download see above
2. Make sure the printer usb cable unplugged from laptop or computer
3. Open the file has been downloaded, double click on the file
4. Follow the instructions that appear during installation
5. When finished plugged usb cable and wait detecting hardware
6. When done doing test print and scan test
7. If test print and scan test is not a problem, then we have succeeded driver installation

Read more

Service tool pixma ip2770 Resetter Pixma iP2270

08.45 in ip2270, ip2770, pixma, resetter, service, tool

steps reset canon pixma iP22700: 
 - Log on to the service mode first connect the printer to the computer and the power cord without turning
  on the printer (the printer is turned off). 
- Press the Resume button about 2 seconds and then press the POWER button until the green light on 
   (when pressing the POWER button, Resume button jgn removed) 
- Then off the RESUME button, but do not release the button POWER
-  While the POWER button still depressed, press the Resume button 5 times. Led will light turns green to
   orange last flame orange. (not to be mistaken 4x because the printer will die in total which means that the 
   steps we have to reinstall from scratch)
- Then release both buttons simultaneously, the LED will blink briefly then will flash GREEN.
- At this time the computer will detect a new device, just ignore it and wait until the process is complete.
- This situation shows the iP2770 printer is in a state of SERVICE MODE and ready to reset

for permanent service
  
1. Download Resetter
2. Exctract File Resetter iP2770. 
2. Service Tool ServiceTool_V1050

 

3. Click the "MAIN", then the printer will proceed, then iP2770 will print one page
    with the words "D = 000.0
4. Click "EEPROM Clear".
5. Then click "EEPROM", and the printer will print the results iP2770 Resetter. One line in his writings as 
    follows: "TPage (TTL = 00000)" 
5.  Turn off the printer by pressing the POWER button.
6. Up here if all goes well, its too printer will reset and is back Normal.

Read more

Canon PIXMA MX882 MX886 Drivers Download

20.30 in canon, download, drivers, mx882, mx886, pixma

Download Driver Printer Canon PIXMA MX882/MX886

Compatibility and system requirements
Windows 8
Windows 7
Windows Vista
Windows XP
All support 32bit & 64bit

Link Download Canon PIXMA MX882/MX886 Drivers Printer

How to install the drivers Canon PIXMA MX882 - PIXMA MX886 for Windows :
1. Download the driver Canon PIXMA MX882, for link download see below
2. Make sure the printer usb cable plugged into the laptop or computer
3. Open the file has been downloaded, double click on the file
4. Follow the instructions that appear during installation
5. When finished doing test print and scan test
6. If test print and scan test is not a problem, then we have succeeded driver installation

Read more

Canon pixma mp750 error 357

05.15 in 357, canon, error, mp750, pixma

Any idea how to fix it? The symptoms, besides displaying error #357, are:
- print head does not move when I open or close the front panels(needed when
replacing ink cartridges)
- Message "Check printer. Press OK"
- Alarm indicator flashes

Read more

Driver Canon PIXMA iP 3680

10.15 in 3680, canon, driver, ip, pixma

Canon PIXMA iP 3680 Driver Download
Operating System Support
- Windows Vista
- Windows Xp
- Windows 2000

Driver Specification
- File name : ip3600svst222ea24.exe
- File version : 2.22
- File size : 9,997KB

Link download

Read more

Driver Canon PIXMA MX426 windows 8 7 xp

13.30 in 7, 8, canon, driver, mx426, pixma, windows, xp

Compatibility and system requirements :

- Windows 8
- Windows 7
- WIndows Vista
- Windows XP
- all drivers Support 32bit and 64bit

Download link Canon PIXMA MX426 Printer MP drivers

Read more

Canon Pixma MX868

21.30 in canon, mx868, pixma

Number of Colors 5 (Pigment Black and BK/C/Y/M dye-based inks)
Printing Technology Bubble-Jet / FINE™ / Chroma Life 100™
Max. Mediasize A4 / Letter
Duplex printing Yes
Remarks Resolution up to 9600 x 2400 dpi, borderless printing
possible, Hi-Speed USB 2.0 and PictBride interface, 2,5" Color-LCD
Pages/min black Pages/min color

OEM No. OCP Ink Code Color Type
PGI-820BK under development
CLI-821BK under development
CLI-821C under development
CLI-821M under development
CLI-821Y under development

Read more

drivers Canon PIXMA MG6270 for windows 8 7 xp

01.00 in 7, 8, canon, drivers, for, mg6270, pixma, windows, xp

Compatibility and system requirements :

- Windows 8
- Windows 7
- WIndows Vista
- Windows XP
- all drivers Support 32bit and 64bit

Download link Canon PIXMA MG6270 Printer MP drivers

Read more

Canon PIXMA MG8240 Drivers Download

05.31 in canon, download, drivers, mg8240, pixma

Compatibility and system requirements :

- Windows 8 (x86,x64)
- Windows 7 (x86,x64)
- WIndows Vista (x86,x64)
- Windows XP
- all drivers Support 32bit and 64bit

Download link Canon PIXMA MG8240 Printer drivers

Read more

Canon PIXMA MX850 Inkjet Multifunctional

16.45 in canon, inkjet, multifunctional, mx850, pixma

Read more

Canon PIXMA MP145

19.15 in canon, mp145, pixma

Reset manual "Ink Absorber Full" for pixma MP145 ( error message E27) actually , its work as same as Canon MP 150 or MP 160, This is the step :

Canon MP145
with the printer powered off but connected to a power source , you must:
A) Press stop/reset button, and then press [ON/OFF] button to restart
B) Press [ON/OFF] again and then press twice the stop/reset button.
C) Press [ON/OFF] & Stop/reset button together, this time to enter
the repair status and power lights will be green,
D) Press stop/reset button 4x and warning lights will be go out
in [ON/OFF]button.
E) Turn off the printer.( it must be turn off) and then turn it on again.
Use with your own risk , ill try this way and my Pixma MP145 not
blink again.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off

1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)

Read more

Canon Pixma IP 1700 Driver Download

12.30 in 1700, canon, download, driver, ip, pixma

Free Download driver printer canon pixma ip 1700
Compatibility and system requirements :

- Windows Vista
- Windows XP
- Windows 2000

Setup instruction

Download / Installation Procedures
1. Click the link, select [ Save ], specify "Save As", then click [ Save ] to download the file.
Memo :
If you select [ Run ] ( or [ Open ] ) instead of [ Save ], the file will be automatically installed after it is saved.
2. The downloaded file will be saved in the specified place in the self-extracting form ( .exe format ).
3. Double-click the downloaded EXE file to decompress it, then installation will start automatically.


Link Download 32 bit
Link Download 64 bit
link download windows 7 (32bit & 64 bit)

Read more