Compatibility and system requirements :- Windows 8
- Windows 7
- WIndows Vista
- Windows XP
- all drivers Support 32bit and 64bit
Download link Epson WorkForce WF-M1560 Printer drivers
Jumat, 28 Februari 2014
Kamis, 27 Februari 2014
Epson Stylus COLOR 300 Windows XP Driver
0
Driver downloads
I finally was able to hack the (already unnofficial) NT drivers for the stylus color 300 to work (in colour!) under XP. I then spent a few
hours trying to simplify the procedure in hopes that other users of this printer might get it to work too.
Before you use the enclosed .REG and .EXE files, you MUST read the (also) enclosed _README-NOW!.RTF text file - this includes
instructions of use, as well as the following disclaimer:
"While these steps worked fine with me, they might not work at all on your machine. In fact, since this procedure involves changes to the Windows Registry it is a SENSITIVE PROCEDURE THAT CAN, IN AN EXTREME CASE, RENDER YOUR WINDOWS XP INSTALLATION USELESS! While I find this
immensely hard to occur, it can hypothetically happen, so you use this at your own risk. I will not be liable for any damages directly or
indirectly connected to using this procedure and it comes with NO WARRANTY whatsoever."
(At the time of writing, I have received feedback from over 100 people and not a single one has ruined their Windows installation and over 95% successfully installed the driver)
Please let me know if it worked for you.
Regards,
Miguel Melo
Canon BJC 2100 waste ink tank full
0
ERROR: Uesd ink tank is full
Waste Error Reset
1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Open Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data
If it does not work. Try some more times. Thanks every one above.
Waste Error Reset
1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Open Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data
If it does not work. Try some more times. Thanks every one above.
Rabu, 26 Februari 2014
Low Ink Warnings On Dell AIO 922 924 926
0
Low Ink Warnings On Dell AIO 922, 924 & 926
Once an OEM cartridge is inserted into your printer, the printer begins to track the ink
used for that particular cartridge. When a cartridge has used about 80% of its ink, the
printer may begin to send the user "your ink level is low" warning messages. After the
cartridge is refilled, the printer may continue to send out these warning messages. The
low ink warning is very common in Dell and Lexmark printers. There is no chip to reset.
It is in the electronics of the cartridge.
These warning messages may simply be ignored, and the printer should continue
to operate normally. However, if you wish to disable the “Low Ink” warning
messages, please follow instruction below.
To disable the “Low Ink” warning messages from your PC do the following:
1. From the WINDOWS™ click START Menu → Programs → Dell Printers → Dell
Photo AIO Printer 922 → Dell All In One Center
2. Click on “Maintain / Troubleshoot” → Click on “Ink Level” → Click on “Advanced”
tab → Click on “More Option” command button
3. Click on the circle option button “Never display the printing status”
4. Click on the circle option button “Never display low ink messages”
(Apply for Photo AIO 926 printer only)
5. Click OK to apply the setting change and close all application.
NOTE: This operation will disable all Printing Status and Low Ink message
display from your PC. This operation can be reversed by repeating these steps
and checking the “Display Printing Status minimized in the taskbar ” “Display all
low ink messages” option button
Once an OEM cartridge is inserted into your printer, the printer begins to track the ink
used for that particular cartridge. When a cartridge has used about 80% of its ink, the
printer may begin to send the user "your ink level is low" warning messages. After the
cartridge is refilled, the printer may continue to send out these warning messages. The
low ink warning is very common in Dell and Lexmark printers. There is no chip to reset.
It is in the electronics of the cartridge.
These warning messages may simply be ignored, and the printer should continue
to operate normally. However, if you wish to disable the “Low Ink” warning
messages, please follow instruction below.
To disable the “Low Ink” warning messages from your PC do the following:
1. From the WINDOWS™ click START Menu → Programs → Dell Printers → Dell
Photo AIO Printer 922 → Dell All In One Center
2. Click on “Maintain / Troubleshoot” → Click on “Ink Level” → Click on “Advanced”
tab → Click on “More Option” command button
3. Click on the circle option button “Never display the printing status”
4. Click on the circle option button “Never display low ink messages”
(Apply for Photo AIO 926 printer only)
5. Click OK to apply the setting change and close all application.
NOTE: This operation will disable all Printing Status and Low Ink message
display from your PC. This operation can be reversed by repeating these steps
and checking the “Display Printing Status minimized in the taskbar ” “Display all
low ink messages” option button
Selasa, 25 Februari 2014
HP Deskjet D2566 Printer
0
HP Deskjet D2466 wasnt produce anymore and as the other change HP Deskjet D2566
Printing specifications
Print speed
Paper type Fast Draft
Black text, plain paper Up to 26 ppm
Mixed text/graphics, plain paper Up to 20 ppm
Image (4x6 with border), photo paper As fast as 26 seconds
Resolution
Black and color resolution on plain paper
Print Quality Render Printing
Plain paper/Fast Draft 300 x 300 dpi Automatic
Plain paper/Fast Normal 600 x 600 dpi Automatic
Plain paper/Normal 600 x 600 dpi Automatic
Inkjet paper/Best 600 x 600 dpi Automatic
Maximum dpi 1200 x 1200 dpi 4800 x 1200 optimized
Color resolution on photo paper
Print Quality Render Printing
Fast Draft 300 x 300 dpi Automatic
Fast Normal 600 x 600 dpi Automatic
Normal 600 x 600 dpi Automatic
Best 600 x 600 dpi Automatic
Maximum dpi 1200 x 1200 dpi 4800 x 1200 optimized
Duty Cycle
* Printer Monthly Duty Cycle : 1,000 pages per month
* Printer Life : 20,000 pages
Power specifications
Power Requirements
Input Voltage
Region Power supply Voltage Frequency
WW 0957-2242 100-240 VAC +/- 10% 50/60 Hz +/- 3 Hz
India/China 0957-2250 200-240 VAC +/- 10% 50/60 Hz +/- 3 Hz
Power Consumption
* Average when ready : less than 2 watts
* Average when printing : 16 watts
* Average in sleep mode : less than 2 watts
* OFF : less than 1 watt
Environmental specifications
Recommended operating conditions
Factor Specifications
Temperature 59 to 86° F; 15 to 30° C
Humidity 20-80% RH non-condensing
Maximum operating conditions
Factor Specifications
Temperature 41 to 104° F; 5 to 40° C
Humidity 15-80% RH non-condensing
